Modelo Elétrico Equivalente para Lâmpadas Fluorescentes sem Eletrodos de Indução
DOI:
https://doi.org/10.18618/REP.2012.1.429438Keywords:
Lâmpada Fluorescente Sem Eletrodos, Modelagem de Lâmpadas, reator eletrônicoAbstract
Este artigo apresenta uma metodologia do modelo elétrico equivalente para lâmpadas fluorescentes sem eletrodos de indução baseado nas suas características resistivas e reativas. O modelo apresentado, assim como sua metodologia, constitui uma ferramenta importante para projetistas de reatores eletrônicos. A metodologia apresentada considera as perdas dos núcleos existentes na bobina de indução e a característica reativa do plasma, sendo uma das principais contribuições deste trabalho. Um conversor meia ponte série paralelo ressonante foi empregado como reator para a lâmpada. O plasma e as bobinas da lâmpada são modelados por resistências e reatâncias dependentes da potência. Simulações, usando o modelo equivalente da lâmpada, estão em concordância com resultados experimentais. Os dados comparativos entre o modelo proposto e obtidos experimentalmente, validam o circuito equivalente apresentado.
Downloads
References
D Wharmby, D.O.; "Electrodeless lamps for lighting: a review" Science, Measurement and Technology, IEE Proceedings A, vol. 140, no. 6, pp. 465-473, Nov. 1993. https://doi.org/10.1049/ip-a-3.1993.0071 DOI: https://doi.org/10.1049/ip-a-3.1993.0071
Shaffer, J.W.; "The Development of Low Frequency, High Output Electrodeless Fluorescent Lamps," Journal of Illuminating Engineering, vol. 28, 1999. https://doi.org/10.1080/00994480.1999.10748260
Piejak, R B.; Godyak, V. A.; and Alexandrovich ,B. M.; "A simple analysis of an inductive RF discharge," Plasma Sources Sci. Technol. vol. 1, no. 3 pp. 179-186, Jul. 1992. https://doi.org/10.1088/0963-0252/1/3/006 DOI: https://doi.org/10.1088/0963-0252/1/3/006
Nerone, L.R.; Qureshi, A.H.; "Mathematical modeling and optimization of the electrodeless, low-pressure, discharge system," Power Electronics Specialists Conference, 1993. PESC '93 Record., 24th Annual IEEE, pp. 509-514, Jun 1993.
Nerone, L.R.; "A novel ballast for electrodeless fluorescent lamps," Industry Applications Conference, 2000. Conference Record of the 2000 IEEE, vol. 5, pp. 3330-3337, 2000.
Shinomya, M.; "The matching network of the inductively coupled discharge lamps", Journal of Light & Visual Environment, vol. 19, pp. 33-39, 1995. https://doi.org/10.2150/jlve.19.2_33 DOI: https://doi.org/10.2150/jlve.19.2_33
Shaffer, J. W.; and Godyak, V. A.; "The development of low frequency high output electrodeless fluorescent lamps", Journal of the IES, vol. 28, no. 1, p. 142, 1999. https://doi.org/10.1080/00994480.1999.10748260 DOI: https://doi.org/10.1080/00994480.1999.10748260
Godyak, V.A.; "Bright idea, radio-frequency light sources", Industry Applications Magazine, IEEE , vol. 8, no. 3, pp. 42-49, Mai/Jun 2002. https://doi.org/10.1109/2943.999612 DOI: https://doi.org/10.1109/2943.999612
Yuming Chen; Dahua Chen; "Simulation the Impedance of Electrodeless Fluorescent Lamp", Industry Applications Conference, 2006. 41st IAS Annual Meeting. Conference Record of the 2006 IEEE,vol. 1, pp. 242-245, 8-12 Outub. 2006. DOI: https://doi.org/10.1109/IAS.2006.256530
Ben-Yaakov, S.; Shvartsas, M.; Lester, J.; "A behavioral SPICE compatible model of an electrodeless fluorescent lamp", Applied Power Electronics Conference and Exposition, 2002. APEC 2002. Seventeenth Annual IEEE, vol. 2, pp. 948-954, 2002.
Lester, J. N.; Alexandrovich, B. M.; "Ballasting electrodeless fluorescent lamps," Journal of the Illuminating Engineering Society,Beverly, Massachusetts. 06 Jan. 1999.
da Silva, M.F.; de P Lopes, J.; Chagas, N.B.; Seidel, A.R.; Costa, M.A.D.; do Prado, R.N.; "High power factor dimmable lighting system for electrodeless fluorescent lamp," Power Electronics Electrical Drives Automation and Motion, 2010 International Symposium on, pp. 379-384, 14-16 Jun. 2010. https://doi.org/10.1109/SPEEDAM.2010.5542172 DOI: https://doi.org/10.1109/SPEEDAM.2010.5542172
Seidel, A.R.; Bisogno, F.E.; Pappis, D.; do Prado, R.N.; "Automatic luminous control for self-oscillating electronic ballast," Industry Applications Conference, 2003. 38th IAS Annual Meeting. Conference Record of the, pp. 773-778 vol.2, 12-16 Out. 2003.
de P. Lopes, J.; da Silva, M.F.; Menke, M.F.; Luz, P.C.; Borin, V.; Bisogno, F.E.; Seidel, A.R.; "Self-Oscillating electronic ballast with lighting intensity regulation", Power Electronics Electrical Drives Automation and Motion (SPEEDAM), 2010 International Symposium,pp.374-378, 14-16 Jun. 2010. https://doi.org/10.1109/SPEEDAM.2010.5542171 DOI: https://doi.org/10.1109/SPEEDAM.2010.5542171
Stanic, E.; Tanach, V. "A new approach to the evaluation of the discharge parameters of the electrodeless fluorescent lamps," Plasma Sources Science Technology, vol. 13, pp. 515-521, Jul. 2004. https://doi.org/10.1088/0963-0252/13/3/018 DOI: https://doi.org/10.1088/0963-0252/13/3/018
Cervi, M.; Seidel, A.R.; Bisogno, F.E.; do Prado, R.N.; "Fluorescent lamp model employing tangent approximation," Power Electronics Specialists Conference, 2002. pesc 02. 2002 IEEE 33rd Annual,vol.1, pp. 187-191, 2002.
Mader, U.; Horn, P.; "A dynamic model for the electrical characteristics of fluorescent lamps", IndustryApplications Society Annual Meeting, 1992., Conference Record of the 1992 IEEE, vol. 2, pp.1928-1934,Oct 1992.
Onishi, N.; Shiomi, T.; Okude, A.; Yamauchi, T.; "A fluorescent lamp model for high frequency wide range dimming electronic ballast simulation", Applied Power Electronics Conference and Exposition, APEC. Fourteenth Annual, vol.2, pp. 1001-1005, Mar. 1999. https://doi.org/10.1109/APEC.1999.750491 DOI: https://doi.org/10.1109/APEC.1999.750491
Stanic, E.; Tanach, V.; "Investigation of the electrical discharge parameters in electrodeless inductive lamps with a re-entrant coupler and magnetic core," Plasma Sources Science Tech., vol. 15, pp. 465-473, 2006. https://doi.org/10.1088/0963-0252/15/3/023 DOI: https://doi.org/10.1088/0963-0252/15/3/023
Popov, O.; Maya, J.; "Characteristics of electrodeless ferrite-free fluorescent lamp operated at frequencies of 1-15 MHz", Plasma Sources Science and Technology,vol. 9, no. 2, pp. 227-237, 2000. https://doi.org/10.1088/0963-0252/9/2/317 DOI: https://doi.org/10.1088/0963-0252/9/2/317
Razzak, M. Abdur; Kondo, Kenji; Uesugi, Yoshihiko; Ohno, Noriyasu; Takamura, Shuichi; "Transition from electrostatic-to-electromagnetic mode in a radio-frequency Ar inductively coupled plasma in atmospheric pressure", Journal of Applied Physics,vol.95, no.2, pp.427-433, Jan. 2004. https://doi.org/10.1063/1.1635650 DOI: https://doi.org/10.1063/1.1635650
Yoon, N.S.; Kim, B.C.; Yang, J.G.; Hwang, S.M.; "A theoretical formula of E-H discharge transition power in a transformer-coupled discharge", Plasma Science, IEEE Transactions, vol.26, pp.190-197, Abr. 1998. https://doi.org/10.1109/27.669626 DOI: https://doi.org/10.1109/27.669626
Bowers, K.J.; Qiu, D.W.; Birdsall, C.K.; "Resonant discharges: initiation and steady state; comparisons with theory, simulation and experiment," Plasma Science, 1999. ICOPS '99. IEEE Conference Record - Abstracts. 1999 IEEE International Conference, pp.138, 1999.
Gonzalez, JJ.; Shabalin, A.; "Electrical characteristics of plasma sheaths in transformer-coupled toroidal discharges, " Plasma Sources Science and Technology,vol. 12, no. 3, pp. 317-323. https://doi.org/10.1088/0963-0252/12/3/304 DOI: https://doi.org/10.1088/0963-0252/12/3/304
do Prado, R.N.; Seidel, A.R.; Bisogno, F.E.; Costa, M.A.D.; "A design method for electronic ballast for fluorescent lamps," Industrial Electronics Society, 2000. IECON 2000. 26th Annual Conference of the IEEE,vol.4, pp.2279-2284, 2000.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2012 Revista Eletrônica de Potência
This work is licensed under a Creative Commons Attribution 4.0 International License.
