Single-stage Charge-pump Voltage-source Electronic Ballast For A 70 W Hps Lamp

Authors

  • José Flávio Dums INEP – Instituto de Eletrônica de Potência - Departamento de Engenharia Elétrica - Universidade Federal de Santa Catarina
  • Claudinor Bitencourt Nascimento INEP – Instituto de Eletrônica de Potência - Departamento de Engenharia Elétrica - Universidade Federal de Santa Catarina
  • Arnaldo José Perin INEP – Instituto de Eletrônica de Potência - Departamento de Engenharia Elétrica - Universidade Federal de Santa Catarina

DOI:

https://doi.org/10.18618/REP.2007.1.043051

Keywords:

electronic ballast, high-pressure sodium lamp, Power Factor Correction - PFC

Abstract

In this paper a single-stage charge-pump voltage-source electronic ballast for a 70 W High Pressure Sodium [HPS] lamp is proposed. Although charge-pump ballasts have already been studied in fluorescent lamp applications, for HPS lamps this topology represents a new research topic. The proposed topology is a combination of a double charge-pump and a half-bridge inverter which share the same switches operating complementary. A microprocessor is used to generate the switching frequency, drive the ballast and to supervise and control the power at the lamp. The proposed ballast presents high power factor and energy efficiency, which is improved by the zero-voltage switching technique. Experimental results obtained on a 70 W high-pressure sodium lamp are discussed.

Downloads

Download data is not yet available.

Author Biographies

José Flávio Dums, INEP – Instituto de Eletrônica de Potência - Departamento de Engenharia Elétrica - Universidade Federal de Santa Catarina

was born in São Bento do Sul, SC, Brazil, on March 28, 1980. He received the B. E. degree the M. Sc. degree in electrical engineering from Universidade Federal de Santa Catarina, Florianopolis, SC, Brazil in 2003 and 2005, respectively. He joined the Industrial Automation Department at Faculdade de Tecnologia Tupy (FTT – SOCIESC – SC) in 2005 and is now engaged in education and research on power electronics analysis and design. Research interests include power electronics, power factor correction, electronic ballast to use with HID lamps and industrial automation systems based on power electronics.

Claudinor Bitencourt Nascimento, INEP – Instituto de Eletrônica de Potência - Departamento de Engenharia Elétrica - Universidade Federal de Santa Catarina

was born in Tubarão, Santa Catarina, Brazil, in 1971. He received the B. E., M. S. and Ph.D. degrees in electrical engineering in 1994, 1996 and 2005, respectively, from the Universidade Federal de Santa Catarina, Florianopolis, SC, Brazil. He joined the Electronic Coordination at Universidade Tecnológica Federal do Paraná (UTFPR) in 1997 where is currently acting as professor of power electronics and automation and control. Research interests include electronic ballasts for discharge lamps, power-factor-correction circuits and new converter topologies.

Arnaldo José Perin, INEP – Instituto de Eletrônica de Potência - Departamento de Engenharia Elétrica - Universidade Federal de Santa Catarina

was born in Nova Prata, RS, Brazil, in 1953. He received the B.E. degree in electronic engineering from the Pontificia Universidade Catolica do Rio Grande do Sul, Brazil in 1977, the M. Sc. degree in electrical engineering from Universidade Federal de Santa Catarina, Florianopolis, SC, Brazil in 1980. In 1984 he received the Doctor Engineer degree (Dr. Ing.) from the Institut National Polytechnique de Toulouse (INPT), Toulouse, France. He joined the Electrical Engineering Department at Universidade Federal de Santa Catarina (UFSC) in 1980 and is now engaged in education and research on power electronics analysis and design. Research interests include power electronics, modulation, ac converters and power factor correction. Since 1993 the research interest concentrates more specifically on electronic ballast to use with fluorescent lamps and with HID lamps. In this area many research was published in Brazilian and International conferences.

References

C. Blanco, M. Alonso, E. López, A. Calleja, and M. Rico, "A single stage fluorescent lamp ballast with high power factor", IEEE-APEC, pp. 616-627, 1996. https://doi.org/10.1109/APEC.1996.500504 DOI: https://doi.org/10.1109/APEC.1996.500504

H. L. Do, and B. H. Kwon, "Single-stage line-coupled half-bridge ballast with unity power factor and ripple-free input current using a coupled inductor", IEEE Trans. Industrial Electron., vol. 50, pp. 1259-1266, Dec. 2003. https://doi.org/10.1109/TIE.2003.819663 DOI: https://doi.org/10.1109/TIE.2003.819663

J. H. Youm, H. L. Do, and B. H. Kwon, "A single-stage electronic ballast with high power factor", IEEE Trans. Industrial Electron., vol. 47, pp. 716-718, June 2000. https://doi.org/10.1109/41.847912

J. Qian, F. C. Lee, T. Yamauchi, "New continuous-input current charge-pump power-factor-correction electronic ballast"IEEE Trans. Industrial Electron., vol. 35, pp. 433-441, March/April 1999. https://doi.org/10.1109/28.753639

E. I. Pereira, C. B. Nascimento, A. J. Perin, "Electronic ballast for fluorescent lamps with the PFC stage integrated with the resonant inverter", 35th Annual IEEE Power Electron. Specialists Conference, vol. 5, pp. 4050-4056, June 2000. https://doi.org/10.1109/PESC.2004.1355192 DOI: https://doi.org/10.1109/PESC.2004.1355192

J. A. Alves, A. J. Perin, I. Barbi, "An electronic ballast with high power factor for compact fluorescent lamps", IEEE Industry Applications Conference, vol. 4, pp. 2129-2135, October 1996. https://doi.org/10.1109/IAS.1996.563869 DOI: https://doi.org/10.1109/IAS.1996.563869

T. Yamauchi, T. Shiomi, "A novel charge pump power factor correction electronic ballast for high intensity discharge lamps". IEEE Power Electronics Specialists Conference, pp. 1761-1767, 1998. https://doi.org/10.1109/PESC.1998.703420 DOI: https://doi.org/10.1109/PESC.1998.703420

H. L. Do, K. W. Seok, B. H. Won, "Single-Stage Electronic Ballast with Unity Power Factor". IEE Proc. Electr. Power Application, vol 148, n2, pp. 171-176, March, 2001. https://doi.org/10.1049/ip-epa:20010087 DOI: https://doi.org/10.1049/ip-epa:20010087

C. B. Nascimento, A. J. Perin, E. I. Pereira, "Low Cost High Power Factor Electronic Ballast with no Input Filter",IEEE Power Electronics Specialists Conference, pp. 1100-1106, 2005. https://doi.org/10.1109/PESC.2005.1581766 DOI: https://doi.org/10.1109/PESC.2005.1581766

C. B. Nascimento, J. M. Buttendorf, E. I. Pereira, A. J. Perin, "Reator Eletrônico com Circuito Simétrico para Correção do Fator de Potência", XV Congresso Brasileiro de Automática, 2004.

J. Qian, F. C. Lee, T. Yamauchi, "New continuous-input current charge-pump power-factor-correction electronic ballast", IEEE Trans. Industrial Electron., vol. 35, pp. 433-441, March/April 1999. https://doi.org/10.1109/28.753639 DOI: https://doi.org/10.1109/28.753639

J. H. Youm, H. L., Do, and B. H. Kwon, "A single-stage electronic ballast with high power factor", IEEE Trans. Industrial Electron., vol. 47, pp. 716-718, June 2000. https://doi.org/10.1109/41.847912 DOI: https://doi.org/10.1109/41.847912

J. F. Dums - "Single-Stage Voltage-Source Charge-Pump HPF Electronic Ballast for HPS Lamps" (in Portuguese) M.Sc. dissertation, Federal University of Santa Catarina, Brasil, September 2005.

Downloads

Published

2007-03-31

How to Cite

[1]
J. F. Dums, C. B. Nascimento, and A. J. Perin, “Single-stage Charge-pump Voltage-source Electronic Ballast For A 70 W Hps Lamp”, Eletrônica de Potência, vol. 12, no. 1, pp. 43–51, Mar. 2007.

Issue

Section

Original Papers